2
Layout
Figure 1. Serial ATA 4-Channel PCI-M
Hardware Installation
Static Electricity Discharge may permanently damage
your system. Discharge any static electricity build up in
your body by touching your computer’s case for a few
seconds. Avoid any contact with internal parts and
handle cards only by their external edges.
1.
Turn OFF the power to your computer and any
other connected peripheral devices. Unplug the
computer's power cord.
2.
Open your computer’s case and install the card in an
available PCI slot.
3.
Push the board down firmly, but gently, until it is
well seated.
4.
Secure the card with a slot bracket holding screw.
Now go to
Device Connection
to connect your Serial
ATA hard disk drives.
CN1
CN2
Serial ATA
connectors
Hard Disk
LED Pins
CN3
CN4
