4
Software Installation
Mac OS X (v10.2.x or later)
drivers are built into the
controllers's firmware, no additional driver installation
or firmware update are needed. Go to
Mac OS X
Installation
on page 5 to complete the installation.
In order for the
Serial ATA 4-Channel PCI-M
to work in
Mac OS X v10.1.x
the firmware must be updated using
the utility on the driver CD. Go to
Mac OS X (10.1.x
Firmware Update
below.
Mac OS X (v10.1.x) Firmware Update
Before installing the update please follow these
guidelines:
•
Make sure no drives are connected to the
Serial ATA
4-Channel PCI-M
•
This utility can only be used in Mac OS X v10.1.x
•
Close all applications before updating the firmware
•
You must have administrator privilages to install
this update
1.
Insert the included software CD. Double click the
Drivers
icon that appears on the desktop.
2.
Copy
SIIG3114101UpDriveR1.sit
onto the desktop,
then double click it.
3.
Double click
SIIG3114101UpDriveR1
Folder
that
appears on the desktop.
4.
Launch the utility by double clicking the file
Update.command
.
5.
Press
C
and the
Return
key to continue. Otherwise
press
Q
and the
Return
key to quit.
6.
Wait about 30 seconds, when finished press
Quit
then shutdown your system.
