5
•
Close all applications before updating the firmware
•
You must login as Root user to install this update
1.
Insert the included software CD. Double click the
Drivers icon that appears on the desktop.
2.
Copy SIIG3512101UpDriveR1.sit onto the desktop,
then double click it.
3.
Double click SIIG3512101UpDriveR1 Folder that
appears on the desktop.
4.
Launch the utility by double clicking the file
Update.command.
5.
Press C and the Return key to continue. Otherwise,
press Q and the Return key to quit.
6.
Wait about 30 seconds, when finished close all open
windows, then shutdown your system.
Mac OS X Installation
For a fresh OS X installation
Use this section when the controller will be the boot
controller and Mac OS X will be installed on a blank or
new hard disk drive.
1.
Install the Serial ATA PCI-M and attached drives.
2.
Boot up your computer with the Mac OS X
CD-ROM. Press and hold letter C on the keyboard
while your system is booting from the CD-ROM.
3.
When Mac OS X finishes booting, click Installer in
the menu bar.
4.
Click Open Disk Utility.
5.
Highlight the drive connected to the
Serial ATA PCI-M and click Partition. Be aware that
partitioning the drive will erase all information on
the hard disk drive.
