background image

1

USB Switch

USB Switch

USB Switch

USB Switch

USB Switch

Quick Installation Guide

Quick Installation Guide

Quick Installation Guide

Quick Installation Guide

Quick Installation Guide

Introducing the 

Introducing the 

Introducing the 

Introducing the 

Introducing the 

USB Switch

USB Switch

USB Switch

USB Switch

USB Switch

The USB switch is designed to share USB device(s) between
multiple systems.

Features and Benefits

Features and Benefits

Features and Benefits

Features and Benefits

Features and Benefits

•   Compliant with USB Specifications, Revision 1.1
•   Active power/activity LED indicator
•   Hotkey control between computers
•   Hot-swapping feature allows you to attach/detach

USB devices without first powering down your
computer

•   Low power consumption-powered from the system.

No power adapter required!

•   Designed for USB devices including printers,

scanners, hard disk drives, cameras and Zip drives

     Note: Not designed to work with mouse or

keyboard

System Requirements

System Requirements

System Requirements

System Requirements

System Requirements

•   PC computer with an available USB port
•   Windows 98/98SE/ME/2000/XP

04-0287B

Summary of Contents for US22 Series









Reviews: