5
Disconnecting the
USB 3.0 to SATA 6Gb/s
Adapter
Use the
Safely Remove Hardware
icon to stop the
USB
3.0 to SATA 6Gb/s Adapter
before disconnecting it from the
computer. Not following these instructions may result in
data corruption, data loss or damage to your SATA drive.
Follow the steps below for your Windows version.
Windows 8 / 7 / Server 2008 R2
1.
Verify that the LED is not flashing before proceeding.
2.
Click
Show hidden icons
, click the
Safely Remove
Hardware and Eject Media
icon located in the system
tray by the system clock.
3.
Click either
Eject USB Mass Storage Device
or
Eject
DVD/CD Drive
.
4.
You can now unplug the
USB 3.0 to SATA 6Gb/s
Adapter
from the computer.
Windows Vista / Server 2008
1.
Verify that the LED is not flashing before proceeding.
2.
Click the
Safely Remove Hardware
icon located in
the system tray by the system clock.
3.
Click
Safely remove USB Mass Storage Device
,
then
click
OK
.
4.
You can now unplug the
USB 3.0 to SATA 6Gb/s
Adapter
from the computer.
