The SIIG USB 3.0 to SATA Hard Drive with SD Reader Enclosure - 2.5" is a versatile storage solution for your data transfer needs. For detailed setup and usage instructions, download the free User Reference Manual from our website. Get your manual at 88.208.23.73:8080 and unlock the full potential of your device today.
5
Hardware Installation
1.
Take the included protective silicon sleeve
off, and turn the
enclosure
onto the back side.
2.
Press and push forward to release the back
cover.
3.
Insert and connect your SATA 2.5" HDD or
SSD, line up the sata connector, then gently
insert the drive into the case.
Figure 2
Figure 3
Figure 4
