4
1.
Turn OFF the power to your computer and any
other connected peripheral devices.
2.
Unplug the power cord and remove your computer
cover.
3.
Remove the slot bracket from an available PCI slot.
4.
Carefully align the card to the selected PCI slot,
push the board down firmly, but gently, until it is
well seated.
5.
Replace the slot bracket's holding screw to secure
the card.
6.
Replace the computer cover and reconnect the
power cord.
Driver Installation
The
Hi-Speed USB 5-Port PCI
has three built-in USB hosts.
Two hosts handle USB 1.1 devices and the third host
handles USB 2.0 devices. USB 1.1 and USB 2.0 devices are
automatically routed to the correct USB hosts.
Windows Driver Installation
Windows 8, 7, Vista, XP , Server 2003 & 2008, Server 2008
R2, and Windows 2000 have built-in driver support for
this controller. Just install the board and Windows will
automatically detect and install the correct drivers for it.
No additional driver is necessary.
