3
1. Connect the PS/2 keyboard and/or mouse to the
appropriate PS/2 connector. Each PS/2 connector has
a picture of either a keyboard or a mouse on it.
2. Connect the USB connector to your system's USB port
and power on your system if it's not already on.
Windows 98/98SE Installation
1. At the Add New Hardware Wizard, click Next.
2. Choose Search for the best driver... and click Next.
3. Clear all check boxes and click Next.
4. Click Next and Finish.
5. In Windows 98, repeat steps 1-4 two more times.
In Windows 98SE
, repeat steps 1-4 one more time.
Windows ME/2000/XP Installation
The drivers are built-in with Windows ME, 2000 and XP.
Simply connect the USB-to-PS/2 to an available USB port
and the drivers will install automatically.
Give Windows a few seconds to completely load all
drivers.
Mac OS 9.0 or later
The drivers are built-in with Mac OS 9.0 or later. Simply
connect the USB-to-PS/2 to an available USB port and the
drivers will install automatically.
Give Mac OS a few seconds to completely load all drivers.
