IOB / IOM / IO3
Safety instructions
Technical changes reserved
- 11 -
1 Safety instructions
Read through the operating manual carefully. Follow all instructions and notices to prevent
injury or damage to property.
Intended use
The temperature sensors of the types IOB / IOM / IO3 detect the media temperature and con-
vert it into a digital IO-Link signal.
WARNING
The temperature sensors of the types IOB / IOM / IO3 are no safety components
in accordance with Directive 2006/42/EC (Machine Directive).
Never use the device as a safety component.
The operational safety of the device supplied is only guaranteed by intended use. The speci-
fied limits (
p. 16) may under no circumstances be exceeded.
Qualified personnel
•
The personnel in charge of the installation, operation and maintenance of the device
must hold a relevant qualification. This can be based on training or relevant instructions.
•
The electrical connection may only be carried out by a fully qualified electrician.
General safety instructions
•
Degree of protection according to EN 60529:
Ensure that the ambient conditions at the place of use do not exceed the requirements of
the specified degree of protection (
p. 16).
•
Only use the device in perfect condition. Damaged or faulty devices must be checked im-
mediately and replaced if necessary.
•
Do not remove or destroy type plates or other markings on the device, or the warranty is
rendered null and void.
Exclusion of liability
We accept no liability for any damage or malfunctions resulting from incorrect installation, inappropri-
ate use of the device or failure to follow the instructions in this operating manual.
