MA504/1
Installation English
MA504/1 · Date
10.05.2016 · Art.
No.
85793 · Mod.
status
242/15
15
4.2 Mounting the electronic display
For panel mounting we recommend the following dimensions:
Fig. 1: Panel mounting
• Panel
1
must be provided with cutout for MA504/1.
• Push the display into the panel cutout until the mounting tabs snap
completely.
• Mounting tabs hold the unit, but allow easy removal, too.
Fig. 2: Mounting
1
Panel
4.3 Electrical installation
Destruction of parts of equipment and loss of regulation control
`
All lines for connecting the electronic display must be shielded.
`
Current linkage: don't connected or removed live.
`
Perform wiring work in the de-energized state only.
`
Use strands with suitable ferrules.
`
Check all lines and plug connections before switching on the device.
`
Switch on operating voltage together with the downstream electronic
unit (e. g., control unit).
WARNING