MA504/1
Battery change English
MA504/1 · Date
10.05.2016 · Art.
No.
85793 · Mod.
status
242/15
16
Basically, all connections are protected against external interference.
Choose a place of operation that excludes inductive or capacitive inter-
ference influences on the electronic display. When mounting the system
keep a maximum possible distance from lines loaded with interference. If
necessary, provide additional installations including screening shields or
metallized housings.
Connection sensor
Connect the sensor to the MA504/1 via the 8-pin jack (see
mounting as well as laying of the sensor cable are described in the User
Information for the sensor MS500H.
Connection power supply
Battery powered.
1
Sensor connection
2
Battery case
Fig. 3: Connection
5 Battery change
Inflammable, danger of explosion and burns
`
Do not recharge the battery nor expose it to temperatures above
85 °C.
`
Dispose of used batteries properly.
When exchanging the batteries take care that their polarity is correct!
Take the marking on the bottom of the box as orientation.
Battery types
Batteries are not supplied together with the MA504/1. The following stan-
dard types can be used:
2 x Micro / AAA
NOTICE
DANGER
NOTICE
