Easy Scan
Plus
English
15
Copyright Silca S.p.A 2016
PROGRAMMING AND UPDATING THE REMOTE CONTROL VIA THE NFC
The remote control is programd using NFC technology, by placing the remote control in the speci
fi
ed part of
the wri ng area
(Fig. 1-N)
and selec ng the appropriate func on that is available on the computer so ware.
FOR MORE INFORMATION, VISIT THE “www.silca.biz” WEBSITE AND ENTER THE KEYWORDS
“EASYSCANPLUSSOFTWARE” INTO THE SEARCH FIELD:
EASYSCANPLUSSOFTWARE
INSERTING, REPLACING AND RECHARGING THE BATTERIES
-
INSERTING & REMOVING
To insert or remove the ba eries, slide the ba ery compartment lid and li it up (Fig.2 - E).
Insert the ba eries the correct way around, as indicated on the bo om of the compartment, then close the
cover.
-
REPLACING
Replace the ba eries with rechargeable ba eries which have the same characteris cs as those supplied
with the Easy Scan Plus: rechargeable AA 1.2V 1800÷2400 mAh nickel-metal hydride ba eries (NiMH).
-
RECHARGING
Easy Scan Plus can recharge the ba eries:
1. By
connec ng the device to a computer via the USB cable provided (a USB 2.0 port with a 0.5 A current
capacity must be used).
2. By
connec ng the device to a ba ery charger with a Micro-B USB connector (not supplied) which has
the following characteris cs: 5.0 VDC output voltage and 0.5 A minimum amperage, compliant to CE
norms.
FIRE DANGER:
WHEN RECHARGING BATTERIES WITH A SEPARATE POWER KIT, TAKE CARE TO USE
CHARGERS WITH THE FOLLOWING CHARACTERISTICS:
MAXIMUM OUTLET CURRENT 8A
MAXIMUM OUTLET POWER 100VA
Tips to increase the life of the ba eries:
•
If the device is not used for a long period of me, remove the ba eries and store them in a safe, cool
and dry place.
•
To extend the life of the ba eries, avoid leaving the device connected to the USB port for long periods
of me once the ba eries have
fi
nished charging.
IMPORTANT NOTE: THERE IS A RISK OF EXPLOSION IF INCORRECT OR DAMAGED BATTERIES
ARE USED E.G. IF THERE IS OXIDATION, LIQUID LOSS OR DEFORMATION .
