Easy Scan
Plus
English
7
Copyright Silca S.p.A 2016
USING THE EASY SCAN PLUS STAND ALONE
Battery status and connection symbols
Indicates that Easy Scan Plus is connected with the computer.
Indicates that the ba eries are missing, or have been
fi
ed wrongly. If so, remove them and
fi
t them with the right polarity.
Indicates that the ba eries are charging.
Quick
fl
ashing indicates that the ba eries are not rechargeable, or there is an error in the
ba ery charging process.
If the ba eries being used are rechargeable, check immediately that they are not damaged or
overheated; if so remove them and replace with new ba eries.
Indicates that charging is complete.
Indicates that the ba ery charge is over 80%.
Indicates that the ba ery charge is between 10% and 80%.
Indicates that the ba ery charge is less than 10%.
Indicates that Easy Scan Plus is connected to a charger.
Power on
Hold down the Easy Scan Plus power bu on un l the display shows the Silca logo .
Language Selection
Language selec on will appear a er the
fi
rst power on of
Easy Scan Plus.
Use the bu on on the side of the display (B) to scroll the
languages available.
When the language has been selected press “ENTER” to
con
fi
rm.
Language Selection
Italiano
> English
Français
Deutsch
(ENT) to continue
The main menu is displayed with the following
func ons:
- Iden
fi
ca on
- Check Copy
- Frequency meter
- Antenna Tuning
- Op ons
Main menu
> Identi
fi
cation
Copy check
Frequency meter
Antenna Tuning
Options
(ENT) to continue
