USE
The key-cutting machine must be installed and used in the way laid down by the manufacturer in the Operating Manual.
If the key-cutting machine is used differently or for purposes different from those described in this manual, the customer will
forego any rights he may have over the manufacturer. Furthermore, unforeseen danger to the operator or any third parties may
arise from incorrect use of the machine.
Negligence in the use of the machine or failure on the part of the operator to observe the instructions given in the manual are
not covered by the guarantee and the manufacturer declines all responsibility in such cases.
Further risks
There are no further risks arising from the use of the machine.
Protection and safety precautions for the operator
Our key-cutting machines are designed with features which make it completely safe in all its parts and are built entirely to the
Machine Directives.
The operations for which it has been designed are easily carried out at no risk to the operator.
Observation of safety regulations and the instructions provided by the manufacturer in this leaflet and the Operating Manual
eliminate all human errors, unless deliberate.
MACHINE CHARACTERISTICS
Noise level
Power supply
The machine is supplied with electricity by means of a separable earthed plug.
The key-cutting machine must be connected to a socket provided with a differential switch.
•
Start-up
The machine is started up by means of the master switch.
•
Machine Identification
The key-cutting machine is provided with an identification label
which shows the serial number.
Use the serial number when ordering spare parts
or requesting servicing.
(*) see "DISPOSAL".
TRANSPORT
Our key-cutting machines are easily transported by one or
more persons (if the weight is over 25-30 Kg.) and is not dangerous to handle.
Packing
Internally the packing comprises expanded polymer shells which enclose the
machine and its parts, holding them securely in place during handling.
A robust cardboard box and nylon wrapping give further protection to the machine
even for long storage periods.
Transport
The packing protects the machine from the risks of handling (knocks, etc.) and is
clearly marked with suitable symbols showing the ideal conditions for transport.
Contents of packing
Check that the packing box contains:
1 key-cutting machine enclosed in the protective shells
1 supply connecting wire
1 tool kit
1 set of documents, including:
Operating Manual, General Instructions, Spare parts list, Guarantee form
It is advisable to keep the cardboard box in good condition, as it may be used again (e.g. removals, dispatch to the manufactur-
ers for repairs or servicing).
Handling the machine
When the key-cutting machine has been unpacked, place it directly on its workbench. This operation can be carried out by one
or more persons
firmly holding the base, and no other part, to lift and carry the machine.
Noise pressure: Lp (A) = 84,69 dB (A)
Fig. 1
Fig. 2
