Optika
Operating manual - English
Copyright Silca 2017
9
4.4
Positioning
Place the
OPTIKA
device on the mat provided, on a solid horizontal worktop suitable for the weight of the machine
(9 Kg).
ATTENTION: position OPTIKA device away from sources of light (spotlights, lamps, etc....).
ATTENTION: it is advisable to place the device in a clean dust-free environment.
To facilitate use and maintenance, leave a clearance of at least 200 mm round the device
(fig. 10).
Check that the machine is firmly placed and steady; its horizontal position avoids obstacles during
reading.
ATTENTION: make sure the device (power supply unit) voltage is suitable for your power supply, which should
be earthed and provided with a differential switch.
Fig. 10
4.5
Description of work station
The device needs only one operator, who has the following controls at his/her disposal
(fig. 7 a pag. 7):
-
display (C);
-
knob/push buttons (D) (E);
-
clamp (A).
200 mm
200 mm
200 mm
