Operating manual - English
Optika
22
Copyright Silca 2017
c) SHORT-STEMMED MALE AND FEMALE BIT KEYS
If the distance between the end of the bit and the light shade device is small (short stem) and
when reading the cuts the left-hand bar cannot face fully upwards (referred to inserted key), pro-
ceed as follows:
1) STEP 1: fit the key into the clamp without the light shade device and try to view a sufficient amount
of stem (fig. 29-B).
2) press ENTER.
3) remove the key and fit the light shade device.
4) STEP 2: fit the key again with the light shade device (fig. 30-B) and press ENTER.
Fig. 29
Fig. 30
oscuratore
adattatore
B
A
NO
YES
STEP 1: Viewing the CUTS
device
light shade
A
B
NO
YES
STEP 2: Viewing the PROFILE
