3.4 SEPARATE PARTS
The machine packing also contains the following components, separately packed:
3.4.1
Power pack and lead
Fig. 9
Fig. 10
Connect POKER PRO to the power pack (W) and connect the latter to the power supply with the power lead
(W2).
W
W2
W1
Fig. 11
3.4.2 Fixing
bracket
If the key-cutting machine is transported and used on a vehicle, e.g. a van, it must be prepared as follows:
1) Turn off the machine and detach the power lead.
2) Remove the tablet holder and tablet.
3) Turn the key-cutting machine onto its back.
4) Connect
the
fi
xing bracket to the machine and secure with the 2 screws.
5) Return the machine to its upright position on the work top.
Fig. 12
Fig. 13
Operating manual
POKER PRO
Copyright Silca 2019
11
