22
4.1 SPEEDOMETER
1.- SPEED INDICATOR
Indicates current speed. This can be read in kilometers per
hour or in miles per hour.
2.- MODE BUTTON
Functions that can be selected with the speedometer
MODE button:
AVG - Average speed of the TRIP selected (TRIP1 or
TRIP2)
TIME - Duration of the partial selected (TRIP1 or TRIP2) in
the format hh: mm: ss.
ODO - odometer (Km indicator)
Temp. B: temperature of Battery Pack
Temp. E: Engine temperature
Temp. C: Controller temperature
All temperatures are given in centigrade degrees.
3.- PARTIAL BUTTON
There are 2 different modes. Press the button to change
between T1 and T2. The user can restore the trip values by
pressing the button for at least 2 seconds.
TRIP1: The value is deleted each time the engine is
switched off (up to 999.9 km).
TRIP2: Deleted only by the user (up to 999.9 km).
To change the hour of the clock you have to see in the display
ODO (press MODE until it appears), then press MODE and
TRIP simultaneously until the first number starts to blink.
Pressing the MODE button will increase its value and
maintaining it will change to minutes.
4.2 PANEL
4 -. LED -
Yellow, on when the side stand is open.
5 -. LED -
Red, Temperature warning.
6 -. LED -
Yellow, the regenerative brake is on.
7 -. LED -
battery low- In Yellow, on when the battery voltage is
less than 25%.
8 -. LED -
Green when indicating a right turn.
9 -. LED -
Yellow, reverse speed in use.
10 -. LED -
Blue, indicates main beam on.
11 -. LED -
Green, indicates correct engine operation.
12 -. LED -
Green when indicating a left turn.
Summary of Contents for SCUTUM S02
