UM_FULL_56SL_REV_A
6
E. CHIRP INDICATION
PARKING LIGHT
Chirp
Function
Parking light
Function
1 Chirp
Lock
1 Flash
Lock
2 Chirps
Unlock
2 Flashes
Unlock
6 Chirps
Car Locator
12 Flashes
Car Locator
Constant On
Under Remote Start
F.
LOCK
1.
Press the button on the transmitter
.
2.
The system will lock the doors (if connected), and the horn chirps and parking lights flash once
indicating
that the keyless entry system is now locked.
The
icon and beeps play to confirm. If Valet Mode* is ON,
the doors lock and the
+
icon and tone play on the LCD transceiver.
SILENT LOCKING
:
Press and hold the transmitter buttons for 1.0 second.
The system will lock the doors
.
No chirp sound will be heard and the lock confirmation will be through the vehicles parking lights only.
G.
UNLOCK
1.
Press the button on the transmitte
r.
2.
The horn will chirp twice and the parking lights will flash twice indicating that the system is now unlocked.
The
icon and beeps play to confirm. If Valet Mode* is ON, the doors unlock and the
+
icon
and tone play on the LCD transceiver.
3. The vehicle’s doors will unlock and the dome light will turn on for 30 seconds upon unlocking.
(
Note:
Power door locks and dome light must be installed with the keyless entry system.)
SILENT UNLOCKING
:
Press and hold the transmitter buttons for 1.0 second. This will unlock your doors.
No chirp sound will be heard and the unlock confirmation will be through the vehicles parking lights only,
PATHWAY ILLUMINATION:
When receiving an unlock signal, this feature will turn the parking lights
“ON”
for 30
seconds and for 10 seconds upon the lock signal.
(See feature bank 2-04)
TWO-STEPS DOOR UNLOCK (Optional):
This feature will independently unlock the driver’s door only when disarming
the keyless entry system.
•
Pushing the button a second time within 3 seconds will unlock the other doors.
H.
PANIC FUNCTION:
Press and hold the button for 3 seconds to activate the personal protection alarm
and the
icon will display on
the LCD screen. During panic mode, the normal function of the transmitter buttons will be suspended. The transmit
ter
and buttons can be used to lock and unlock the door (if the option is installed). To stop the alarm, press and hold the
button on the transmitter again for 3 seconds. The system will automatically stop after 30 seconds.
Summary of Contents for 56SL
Page 1: ......