Silent Circle GoSilent GSC-100, Setup Manual

GoSilent - GSC100 Setup Guide

Version 1.0

9

www.silentcircle.com

Check for Update

1.  Under the Tools drop down, select the “Check for Update” icon in the 

Tools menu (Fig. 21).

2.  If an update is available, then you will see the update in the Alerts and 

Messages section. Select the “Bell” icon to view the available update. 

3.  The window (Fig. 22) will show update version and size.  Select “More 

Info” to continue, or “Dismiss” to cancel the update process.

4.  The next window (Fig. 23) will show details about the Update.
5.  Select “Update now”.  Read the information on the next screen and 

select “Download and Update”.

6.  The box will show “Downloading update” below the instructions and 

three dots in the selection box while the update is downloading to the 

GSC-100.

7.  Once the update is downloaded, the installation will start with a 

progress bar displayed.

8.  Once the installation is complete, the progress bar will turn green and 

display “100%”.  Now select “Go To Dashboard” to return to the main 

menu.

Network
Local Settings

This is an advance option allowing you to change  IP addresses of the 

LAN.  Editing these fields should be done by IT Administrators only.

Internet Settings

This allows you to change the Internet connection to a new WiFi or 

Ethernet source.
1.  Select “Internet Settings” then select either WiFi or Ethernet.
2.  Follow the steps under 

Setup Wizard

 to set up a new WiFi or 

Ethernet connection.

Fig. 22

Note: The update process can take up to 30 

minutes depending on Internet connection speed.

Note: You can select “About This GoSilent” at 

the bottom of the Menu pull down to show the 

firmware version and serial number.

Fig. 23

Fig. 21