How much storage do I get on my camera
G-Sensor
The camera has a built in G-Sensor, in the event of an accident if the G-Sensor is activated it will automatically Lock the file, so
that this video file can not be deleted over the top by the Loop setting and will save this in a separate folder.
OFF— G Force is switched off , No videos will be locked.
Motion Detection
Motion detection is a function for when you are leaving your vehicle and want to record activity around the vehicle.
When this function is switched on, and an object is detected in the lens the camera will turn on and start to record, when the
object has passed and there is no movement detected the camera will then turn off.
Please note: this function must be switched off whilst driving, failure to switch off can may cause inconsistent video footage.
Fault Handling
1. The camera LEDS are not illuminating
A. Please check all connections.
B. Please check all fuses.
C. Please make sure ACC is switched on .
2. My camera does not record any videos
A. Please make sure the SD card is inserted .
B. Please make sure the SD card has been formatted.
3. All the LEDS are flashing on the camera
A. This is the G-Sensor being activated
4. The camera has the wrong Time and Date
A. Please make sure your car battery has not been disconnected or is flat, the camera will need to be reset.
For more Information and Help please visit
www.silentwitness.co.uk
Setting
Size
8GB Card
32GB Card
720P
1280 x 720
180 min
720 min
WVGA WXH
848 x 480
256 min
1024 min
VGA
640 x 480
533 min
2132 min
QVGA
320 x 240
1504 min
6016 min
