background image

Chapter 4                  Installation Warnings 

For safely and a long service life, please note these warnings when installing and using the 
device:

1. Please check contents and the device. If there is anything damaged or missing, please 
contact your seller. 

2.  When  installing  and  operating  the  device,  please  avoid  any  close  proximity  to  other 
electronic devices and electronics on the vehicle. 

3.  Please  double  check  the  input  power  voltage,  it  should  be  8-36V  DC,  to  avoid  any 
damage caused by the wrong voltage. 

4. The device should only work in the permitted temperature and humidity. 

5. There should be enough ventilation space around the DVR and all external cables of the 
device should be protected to avoid abrasion and water ingress 

6. The installation and construction should be compliant with automotive standard 

About the Manual 

  

 

  

We have tried to ensure that what is in this manual is correct and up to date. However, we can not 
guarantee that all content is correct without any errors. If there is a variance between the manual and 
camera, please accept the camera standard as correct. We reserve the right to change content or 
technical regulations without informing you prior to making any changes. In addition, the manufacturer 
reserves the right to change technical speci

fi

cation without informing you prior to making any changes. 

For more information, large text manual and video guides 

please visit… 

www.silentwitness.co.uk 

Summary of Contents for SW004-AHD


































Reviews: