background image

We recommend formatting the SD card or hard drive regularly. 

Do not disassemble or modify an SD card or hard drive. - It may cause a serious damage 
to the SD card or hard drive. 

Do not drop the SD card or hard drive. - It may cause a serious damage to the SD card or 
hard drive 

Do NOT buy cheap SD cards or hard drives…they do not last very long! 

During normal operation of the camera it will get warm. This is normal. 

Do not leave the camera in a very hot car during the daytime. 

It is advisable to remove the camera from the vehicle when not in use to deter thieves. 

Recording times may vary based on the type of memory used and settings of camera. 
Any quoted times are for use as a guide only. 

IN THE EVENT OF AN ACCIDENT 

IMPORTANT: In the event of an accident, we recommend backing up the data 
immediately to reduce the risk of the DVR system recording over the 

fi

les.  

If for any reason you are involved in an accident that does NOT trigger the DVR to make 
an EVENT and you keep driving with the camera running then you can potentially 
record OVER the bit of video you need to use. 

If the DVR does create an EVENT 

fi

le at the time of the accident and you continue to 

drive and the DVR makes too many EVENTS then the DVR could overwrite the EVENT 
you need to use. 

If you are involved in an accident it is best to download the footage as soon as possible. 

Parksafe Automotive Limited cannot be held responsible for video 

fi

les being 

overwritten or for data loss from the SD card or hard drive. 

WARNING:

 NEVER remove the SD card or hard drive from the DVR whilst it is powered 

on. Always remove the power supply from the DVR. 

If the Silent Witness DVR is being used in a commercial application. We advise the 
company’s 

fl

eet manager to relay this information to the drivers. 

It is advisable to take precautions after an EVENT takes place in order for the DVR to 
not ERASE this important data.  

LIMITED WARRANTY STATEMENT: 

This Limited Warranty shall apply to the Silent Witness product including all accessories as 
contained within the original Silent Witness box “the Product”. Parksafe Automotive 
Limited warrants the product from its authorised distributor will meet the applicable 
product speci

fi

cations and be free from all defects in material and workmanship for an 

applicable period herein “Limited Warranty”. This Limited Warranty is subjected to the 
following terms and conditions: 

1. This Limited Warranty is given only to the original purchaser of the Product “Customer” it 
shall neither exclude nor limit a) any statutory rights of the Customer or b) any of the 
Customer’s rights against the sellers of the Product. 
  
2. The Limited Warranty shall be restricted to the country/region of Product purchase this is 
to avoid excessive import or exportation of the Product throughout the supported 
countries. 
  
3. This Limited Warranty is only valid and enforceable in countries where the Product is 
sold. Outside of the country of purchase, any repairs performed by Parksafe Automotive 

Summary of Contents for SW004-AHD


































Reviews: