8614 Veterans Memorial. Houston, Texas, 77088
832/327-7452 800/972-7668 Fax: 832/327-0668
E-mail: sales@silentaire.com
Thank you and congratulations on the purchase of your
SCORPION
compressor.
The
SCORPION
is built to the highest quality standards which produce excellent
efficiency. If you use it properly and maintain it according to this manual, it will
perform to your fullest satisfaction for many years to come. Please read this
manual, carefully and follow the instructions, it will guarantee you a troublefree
operation.
A.
Installation
1.
After taking your
SCORPION
compressor out of its packaging,
please check it carefully for any damages due to shipping.
2.
Install the compressor on a flat surface in a suitable sized, dry room
with good ventilation, where the temperature is not likely to rise
above 94 Degrees Farenheit (35 Centigrades).
3.
Dispose of the packing material in compliance with the regulations
in the country or state where the compressor is installed.
B.
Safety
1.
Do Not use the OILLESS compressor for purposes other than those
for which it has been designed.
2.
Do Not modify or repair the compressor while it is connected to the
electric current.
3.
Note: The electric outlet has to be properly installed and grounded!
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR
MOISTURE..
This "bolt of lightning" indicates uninstalled material within your
unit may cause an electrical shock. For the safety of everyone
please do not remove product covering.
The "exclamation point" calls attention to features for which you
should
read the enclosed literature closely to prevent operating and
maintenance problems.
