Clock, time / day setting sequence
To set the clock time / day settings follow detailed step by step instructions below.
Clock, time / day setting instructions
When setting the hour, minute and day during the programming process, moving to the next
function means the last information in the previous function is remembered.
1)
Press for 3 seconds to unlock the screen (ensure the screen unlocks before moving to
the next step) padlock symbol disappears the no. 1 appears top left.
Re-press for 3 seconds again to enter clock programming mode, the clock symbol flashes
top left of screen.
2)
Press once to select clock setting programme (defaults to hours).
Press to move hour forwards,
press to move hour backwards
–
set hour
.
3)
Press once to go to minutes
Press to move minute forwards,
press to move minute backwards
–
set minutes.
4)
Press once to go to day
Press to move day forwards,
press to move day backwards
–
set day.
5)
Press for 3 seconds to save clock settings and exit clock programming mode return to
the control window.
Warning:
During normal use and the setting process above the timer screen will lock if the
timer is not used or no operation buttons are pressed within 30 seconds. It is now necessary
to repeat the processes in steps
1 & 2
above to re-enter the clock setting programme.
Now the clock has been set correctly, proceed to set the automatic open and close times via
the timer points as described in the following pages.
1
2)
3
4
5
