User Guide - Silex ClickShow R101
20.2- Update the system via the Configurator
To update the ClickShow device, the Kernel upgrade should be processed separately
first. Only when the Kernel upgrade is completed, can the OS upgrade take place.
Login to the Configurator as described in
and go to Maintain – Upgrade.
Select the downloaded Kernel file then click on ‘Upgrade’. The ClickShow Base unit will
automatically restart.
After performing the Kernel upgrade, you can upgrade the OS. Select the downloaded
OS file then click on ‘Upgrade’. Once the upgrade is done, the ClickShow Base unit will
automatically restart and the new software version will appear on the top left corner of
the wallpaper on the meeting room main display.
20.3- Update the system using a USB flash drive
1. Prepare the USB flash drive:
• USB flash drive name: you can name the USB flash drive anything except ESHOW.
• The file format of the USB flash drive should be FAT32 or FAT. If it is not the case,
you need to format the USB flash drive into FAT32 or FAT file format
• Create a new ESHOW folder under the root directory of the USB flash drive
(uppercase) and copy the downloaded upgrade files (the Kernel and the OS) to that
ESHOW folder
2. System update:
• Power off the ClickShow Base unit, then insert the USB flash drive into its USB
interface. Power on again
• When the light indicator of the ClickShow Base unit changes from blue to purple,
and a message showing that the system is updating will appear on the meeting
room main display. The update takes 3 to 5 minutes
• Once the update is done, light indicator will change from purple to blue
• Power off the ClickShow Base unit, remove the USB flash drive, and then power on
again. The new software version will appear on the top left corner of the wallpaper
on the meeting room main display
© 2019 SilexPro. All rights reserved.
14
