background image

2-1

Users Manual SX2

PRICOM SX-3700WB

2. PRICOM SX-3700WB

This product is a wireless USB device server that will serve USB type peripheral equipment

(a printer, scanner etc.). By using the bundled PRICOM Monitor SX, it is possible to view the

state of the connected printer via a network.  In addition it is possible, by using the bundled

PRICOM USB Utility, to share a scanner as a network scanner.

- Windows 2000, Windows XP, or Windows Server 2003 is required to use the network scanning

function.

- Only one USB device can be connected at a time.  The USB device must be connected directly

to this product

- Refer to our web page ( http://www.silex.jp/ ) for the most up to date information.

NOTE

TIP

This equipment has been tested and found  to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment  generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that  interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

  receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

         EN55022 Class-B

         EN55024

Summary of Contents for PRICOM SX-3700WB















Reviews: