background image

R

?

Danby Products Limited, Guelph, Ontario, Canadá N1H 6Z9

Danby Products Inc., Findlay, Ohio, EE.UU. 45840

Printed in China
Impreso en China 
Imprimé en Chine

HOOD RANGE

The model number can be found on the serial plate 
located on the back panel of the unit.
All repair parts available for purchase or special 
order when you visit your nearest service depot. To 
request service and/or the location of the service 
depot nearest you, call the TOLL FREE number.

When requesting service or ordering parts, always 
provide the following information:

•  Product Type
•  Model Number
•  Part Description

CAMPANA DE COCINA

El número de modelo se encuentra en la placa 
ubicada en el panel posterior de la unidad.
Todas las partes de recambio pueden comprarse 
o encargarse especialmente en su taller de 
reparación autorizado. Para solicitar servicio y/o 
localizar el taller de servicio mas cercano, llame a 
nuestro NÚMERO SIN CARGO.

Proporcione siempre la siguiente información al 
solicitar servicio o al ordenar partes:

•  Tipo de Producto
•  Número de Modelo
•  Descripción de la Parte

HOTTE DE CUISINE

Le numéro de modèle se trouve sur la plaque 
signalétique au dos de l’unité.
Vous pouvez vous procurer/commander toute 
pièce de rechange chez votre dépositaire le plus 
rapproché. Pour toute demande de service ou pour 
localiser le dépositaire/centre de service le plus 
rapproché, composez le numéro SANS FRAIS.

Pour toute demande de service ou commande de 
pièces, fournissez toujours l’information suivante :

•  Type de produit
•  Numéro de modèle
•  Description de la pièce requise

Model • Modéle • Modelo

DWRH302SSST

Summary of Contents for DWRH303GSST
















Reviews: