Rack Mounting Instructions
007-4988-001
19
3.
Using two people, align and insert the data manager’s mounting studs into the component
mounting channels on the two slide rails, see Figure 1-16 for an example.
Figure 1-16
Data Manager Slide Rail Mounting Stud Positions
4.
Place the data manager’s mounting studs in the mounting channels of both rails until they are
fully seated.
Note:
The release levers on each slide rail should pivot out of the way and then snap back
into place when the mounting studs are fully seated.
5.
Confirm that all the data manager’s mounting studs are correctly in place on the slide rails
(see Figure 1-17 on page 20 for an example), before sliding the unit into the rack.
6.
Press in both the left and right slide extension release levers and slowly push the data
manager inward until the unit is fully locked in place and the chassis handles are against the
front posts.
Summary of Contents for InfiniteStorage NEXIS 2000
Page 1: ...SGI InfiniteStorage NEXIS 2000 Quick Start Guide 007 4988 001 ...
Page 4: ......
Page 32: ......
