Silicon Laboratories C8051F31 Series, User Manual

C8051F31x-DK

10

Rev. 0.6

D

OCUMENT

 C

HANGE

 L

IST

Revision 0.4 to Revision 0.5

„

Section 1, added USB Debug Adapter and USB Cable.

„

Section 2, changed name from "Hardware Setup" to "Hardware Setup using an EC2 Serial Adapter".

„

Section 2, added 2 Notes bullets.

„

Section 2, removed Note from bottom of page.

„

Added Section 3, "Hardware Setup using a USB Debug Adapter".

„

Section 5.4.2, changed step 2 to include new instructions.

„

Section 7, J4, changed "Serial Adapter" to "Debug Adapter".

„

Target Board DEBUG Interface Section, added USB Debug Adapter.

„

DEBUG Connector Pin Descriptions Table, changed pin 4 to C2D.

„

Changed "jumper" to "header".

„

EC2 Serial Adapter section, added EC2 to the section title, table title and figure title.

„

EC2 Serial Adapter section, changed "JTAG" to "DEBUG".

„

Added "USB Debug Adapter" section.

„

Section 7, J8, changed "Serial Adapter" to "USB Debug Adapter".

„

DEBUG Connector Pin Descriptions Table, changed pin 10 to USB Power.

„

USB Debug Adapter Target Board Power Connector (J8) Section, changed "Serial" to "USB Debug".

Revision 0.5 to Revision 0.6

„

Removed EC2 Serial Adapter from Kit Contents.

„

Removed Section 2. Hardware Setup using an EC2 Serial Adapter. See RS232 Serial Adapter (EC2) User's 
Guide.

„

Removed Section 8. EC2 Serial Adapter. See RS232 Serial Adapter (EC2) User's Guide.

„

Removed Section 9. USB Debug Adapter. See USB Debug Adapter User's Guide.