C8051F31x-DK
Rev. 0.6
5
6. Target Board
The C8051F31x Development Kit includes a target board with a C8051F310 device pre-installed for evaluation and
preliminary software development. Numerous input/output (I/O) connections are provided to facilitate prototyping
using the target board. Refer to Figure 2 for the locations of the various I/O connectors.
P1
Power connector (accepts input from 7 to 15 VDC unregulated power adapter)
J1
34-pin Expansion I/O connector
J3
Port I/O Configuration connector
J4
DEBUG connector for Debug Adapter interface
J5
DB-9 connector for UART0 RS232 interface
J6
Analog I/O terminal block
J7
Low pass filter connector
J8
USB Debug Adapter target board power connector
J9, J10
External crystal enable connectors
Figure 2. C8051F310 Target Board
J7
PWR
Pin 1
Pin 2
D
EBU
G
Pin 1
P1
J5
P
rot
ot
ype A
rea
Pin 1
J6
C8051
F31X
Pin 2
Pin 1
Prototyping Area I/O Connection Points
RESET P0.7
P3.3
J10
J9
J8
J1
J3
J4
