Rev. 0.3 2/14
Copyright © 2014 by Silicon Laboratories
C8051F336/7/8/9
C 8 0 5 1 F 3 3 6 / 7 / 8 / 9
C 8 0 5 1 F 3 3 6 D
E V E L O P M E N T
K
I T
U
S E R
’
S
G
U I D E
1. Relevant Devices
The C8051F338 Development Kit is intended as a development platform for the microcontrollers in the
C8051F336/7/8/9 MCU family.
Notes:
• The target board included in this kit is provided with a pre-soldered
C8051F338
MCU (QFN24 package).
• Code developed on the C8051F338 can be easily ported to the other members of this MCU family.
• Refer to the C8051F336/7/8/9 data sheet for the differences between the members of this MCU family.
• The C8051F336/7/8/9 family of devices are code-compatible with the C8051F330/1/2/3/4/5 family of
devices.
2. Kit Contents
The C8051F336 Development Kit contains the following items:
• C8051F338 Target Board
• C8051Fxxx Development Kit Quick-Start Guide
• AC to DC Power Adapter
• USB Debug Adapter (USB to Debug Interface)
• USB Cable
• CD-ROM
3. Hardware Setup Using a USB Debug Adapter
The target board is connected to a PC running the Silicon Laboratories IDE via the USB Debug Adapter as shown
in Figure 1.
1.
Connect the USB Debug Adapter to the
DEBUG
connector on the target board with the 10-pin ribbon cable.
2.
Connect one end of the USB cable to the USB connector on the USB Debug Adapter.
3.
Connect the other end of the USB cable to a USB Port on the PC.
4.
Connect the ac/dc power adapter to power jack
P1
on the target board.
Notes:
• Use the Reset button in the IDE to reset the target when connected using a USB Debug Adapter.
• Remove power from the target board and the USB Debug Adapter before connecting or disconnecting the
ribbon cable from the target board. Connecting or disconnecting the cable when the devices have power can
damage the device and/or the USB Debug Adapter.
Figure 1. Hardware Setup Using a USB Debug Adapter
SW3
P2
CP
2102
U3
F338
U1
P1
DE
BU
G
J4
+3VD
GND
P1.3
D7
USB
D4
P0.7
SW
2
RESET
SW
1
TB1
SILICON LABS
www.silabs.com
J11
J7
J8
J1
J2
J3
J6
J9
J10
J5
Pr
ot
ot
yp
e A
re
a
R14
PWR
D6
USB
Cable
AC/DC
Adapter
Target Board
S
ili
c
on Lab
ora
tori
es
US
B D
E
B
U
G
AD
APTE
R
Ru
n
St
o
p
Po
w
e
r
USB Debug
Adapter
