C8051F35x-DK
Rev. 0.1
5
6. Target Board
The C8051F35x Development Kit includes a target board with a C8051F350 device pre-installed for evaluation and
preliminary software development. Numerous input/output (I/O) connections are provided to facilitate prototyping
using the target board. Refer to Figure 2 for the locations of the various I/O connectors.
P1
Power connector (accepts input from 7 to 15 VDC unregulated power adapter)
J1
22-pin Expansion I/O connector
J3
Port I/O Configuration Jumper Block
J4
DEBUG connector for Serial Adapter interface
J5
DB-9 connector for UART0 RS232 interface
J6
Analog I/O terminal block
J7
Connector for IDAC0 voltage circuit
J8
Serial Adapter target board power connector
J9, J10
External crystal enable connectors
J11
Connector for IDAC1 voltage circuit
J12
Connector block for Thermistor circuitry
J13, J14 ADC external voltage reference connectors
D
E
BU
G
Pin 1
P1
J5
P
rot
oty
p
e Ar
ea
Pin 1
J6
C8051
F35X
Prototyping Area & I/O Connection Points
J8
J4
Pin 2
Pin 1
J1
PWR
P1.0 Reset
P0.6
P0.7
J2
J9 J10
J11 J7
Pin 1
Pin 2
J12
Pin 1
Pin 2
J3
J14
J13
Pin 1
Figure 2. C8051F350 Target Board
