Rev. 0.3 10/14
Copyright © 2014 by Silicon Laboratories
C8051F36x-DK
C 8 0 5 1 F 3 6 x - D K
C 8 0 5 1 F 3 6 x D
E V E L O P M E N T
K
I T
U
S E R
’
S
G
U I D E
1. Relevant Devices
The C8051F360 Development Kit is intended as a development platform for the microcontrollers in the C8051F36x
MCU family.
Notes:
The target board included in this kit is provided with a pre-soldered
C8051F360
MCU (LQFP48 package).
Code developed on the C8051F360 can be easily ported to the other members of this MCU family.
Refer to the C8051F36x data sheet for the differences between the members of this MCU family.
The C8051F36x family of devices are code-compatible with the C8051F330/1/2/3/4/5 family of devices.
2. Kit Contents
The C8051F36x-DK Development Kit contains the following items:
C8051F360 Target Board
C8051Fxxx Development Kit Quick-Start Guide
AC/DC Power Adapter
USB Debug Adapter (USB to Debug Interface)
USB Cable
CD-ROM
3. Hardware Setup Using a USB Debug Adapter
The target board is connected to a PC running the Simplicity Studio via the USB Debug Adapter as shown in
Figure 1.
1. Connect the USB Debug Adapter to the
DEBUG
connector on the target board with the 10-pin ribbon
cable.
2. Connect one end of the USB cable to the USB connector on the USB Debug Adapter.
3. Connect the other end of the USB cable to a USB Port on the PC.
4. Connect the AC/DC Power Adapter to power jack
P2
on the target board.
Notes:
Use the
Reset
button in the IDE to reset the target when connected using a USB Debug Adapter.
Remove power from the target board before removing the ribbon cable from the target board. Connecting
or disconnecting the cable when the devices have power can damage the device and/or the USB Debug
Adapter.
