Rev. 0.1 12/06
Copyright © 2006 by Silicon Laboratories
C8051F36x-DK
C8051F36x-DK
C8051F36x D
E V E L O P M E N T
K
I T
U
S E R
’
S
G
U I D E
1. Kit Contents
The C8051F36x Development Kit contains the following items:
• C8051F360 Target Board
• C8051Fxxx Development Kit Quick-start Guide
• Silicon Laboratories IDE and Product Information CD-ROM. CD content includes:
• Silicon Laboratories Integrated Development Environment (IDE)
• Keil 8051 Development Tools (macro assembler, linker, evaluation ‘C’ compiler)
• Source code examples and register definition files
• Documentation
• C8051F36x Development Kit User’s Guide (this document)
• AC/DC Power Adapter
• USB Debug Adapter (USB to Debug Interface)
• USB Cable
2. Hardware Setup using a USB Debug Adapter
The target board is connected to a PC running the Silicon Laboratories IDE via the USB Debug Adapter as shown
in Figure 1.
1. Connect the USB Debug Adapter to the DEBUG connector on the target board with the 10-pin ribbon cable.
2. Connect one end of the USB cable to the USB connector on the USB Debug Adapter.
3. Connect the other end of the USB cable to a USB Port on the PC.
4. Connect the AC/DC Power Adapter to power jack P2 on the target board.
Notes:
• Use the Reset button in the IDE to reset the target when connected using a USB Debug Adapter.
• Remove power from the target board before removing the ribbon cable from the target board. Connecting or
disconnecting the cable when the devices have power can damage the device and/or the USB Debug
Adapter.
Figure 1. Hardware Setup using a USB Debug Adapter
PC
USB
Cable
USB Debug Adapter
AC/DC
Adapter
Target Board
P1
P3.0
P3.1
RESET
P4
P2
DEBUG
J9
U3
F360
U1
USB
ACTIVE
D5
PW
R
POWER
D3
D4
P3
SILICON LABS
www.silabs.com
J14
+3
V
D
J13
P2
.5
PORT_1
J3
PORT_2
J4
PORT_3
J5
PORT_4
J6
PORT_0
J2
J8
J12
SW3.0
TX
P3.3_LED
RX
CTS
RTS
P3.2_LED
SW3.1
P3.0
P0.1
P3.3
P0.2
P3.5
P3.4
P3.2
P3.1
J1
P
1_P
W
R
SE
R_
PW
R
VB
US
RE
G
_I
N
RE
G
_I
N
RE
G
_I
N
J15
J16
J10
J11
C8051F360 TB
R10
Sil
icon La
bor
at
or
ie
s
USB DEBUG
ADAPTE
R
Ru
n
St
o
p
Po
w
er
