C 8 0 5 1 F 5 3 x / 5 2 x
2
Rev. 0.4
Notes:
1.
Use the
Reset
button in the IDE to reset the target when connected using a USB Debug Adapter.
2.
Remove power from the target board and the USB Debug Adapter before connecting or disconnecting the
ribbon cable from the target board. Connecting or disconnecting the cable when the devices have power can
damage the device and/or the USB Debug Adapter.
4. Software Setup
Simplicity Studio greatly reduces development time and complexity with Silicon Labs EFM32 and 8051 MCU
products by providing a high-powered IDE, tools for hardware configuration, and links to helpful resources, all in
one place.
Once Simplicity Studio is installed, the application itself can be used to install additional software and
documentation components to aid in the development and evaluation process.
Figure 2. Simplicity Studio
The following Simplicity Studio components are required for the C8051F530 Development Kit:
8051 Products Part Support
Simplicity Developer Platform
Download and install Simplicity Studio from
www.silabs.com/simplicity-studio
Once installed, run Simplicity Studio by selecting
Start
Silicon Labs
Simplicity Studio
Simplicity Studio
from the start menu or clicking the
Simplicity Studio
shortcut on the desktop. Follow the instructions to install the
software and click
Simplicity IDE
to launch the IDE.
The first time the project creation wizard runs, the
Setup Environment
wizard will guide the user through the
process of configuring the build tools and SDK selection.
