C8051F930-DK
10
Rev. 0.5
5.2. Building and Downloading the Program for Debugging
1. Once all source files have been added to the target build, build the project by clicking on the Build/Make Project
button in the toolbar or selecting Project
Build/Make Project from the menu.
Note:
After the project has been built the first time, the Build/Make Project command will only build the files that
have been changed since the previous build. To rebuild all files and project dependencies, click on the Rebuild
All button in the toolbar or select Project
Rebuild All from the menu.
2. Before connecting to the target device, several connection options may need to be set. Open the Connection
Options window by selecting Options
Connection Options... in the IDE menu. First, select the appropriate
adapter in the “Serial Adapter” section. Next, the correct “Debug Interface” must be selected. C8051F93x-
C8051F92x family devices use the Silicon Labs 2-wire (C2) debug interface. Once all the selections are made,
click the OK button to close the window.
3. Click the Connect button in the toolbar or select Debug
Connect from the menu to connect to the device.
4. Download the project to the target by clicking the Download Code button in the toolbar.
Note:
To enable automatic downloading if the program build is successful select Enable automatic connect/
download after build in the Project
Target Build Configuration dialog. If errors occur during the build process,
the IDE will not attempt the download.
5. Save the project when finished with the debug session to preserve the current target build configuration, editor
settings and the location of all open debug views. To save the project, select Project
Save Project As... from
the menu. Create a new name for the project and click on Save.
Downloaded from
Elcodis.com
electronic components distributor
