3. Device Customization
Device customization for the CP2102N is done through Xpress Configurator, which is available in Simplicity Studio:
http://www.silabs.com/simplicity
The Simplicity Studio software package contains all the tools, drivers, configuration software, and documentation needed to use the
CP2102N USB-to-UART Bridge Mini Evaluation Board.
After downloading the latest version of Simplicity Studio and installing the software:
1. Install the CP210x Virtual COM Port Driver during the software setup steps, if it's not already installed. This action can always be
accessed through [
Help
]>[
Setup Tasks
].
2. Connect the CP2102N to the PC.
3. Select [
CP2102N
] under [
Devices
]. On the board, a successful USB connection is established when the SUSPENDB LED (D2)
turns on.
4. Click on [
Compatible Tools
]>[
Xpress Configurator
] to open Xpress Configurator and customize the device.
Documentation for each of the customization options is provided within Xpress Configurator. More information on each of these options
can be found in
AN721: CP210x Device Customization Guide
, which is available on the Silicon Labs website (
www.silabs.com/inter-
face-appnotes
) or within Simplicity Studio under [
Getting Started
]>[
Application Notes
].
UG254: CP2102N-MINIEK Kit User's Guide
Device Customization
silabs.com
| Smart. Connected. Energy-friendly.
Rev. 0.1 | 5
