Silicon Laboratories EFM32 EFM32GG11 Giant Gecko Series Quick Start Manual Download

Page: 6 / 12

Detect Your Device

1. Provide power and a debug connection to the kit by connecting the provided USB cable between the kit and a computer. Use the

USB connector in the upper left of the board.

2. Ensure the power selector switch on the STK is in the [

AEM

] position.

3. Click the [

Refresh

] button in the [

Device

] area. The board may take some time to appear due to driver installations for the debug

adapter.

4. Once an item with the name [

J-Link Silicon Labs

] appears, expand by clicking the arrow, and verify that the detected devices

matches the kit. Click the EFM32GG11 Giant Gecko Starter Kit.

5. The [

Launcher

] view will now display a number of available resources, including pre-compiled demos, examples, documentation,

tools, and other resources.

QSG149: EFM32GG11-SLSTK3701A Quick-Start Guide

Getting Started

silabs.com

| Building a more connected world.

Rev. 0.1 | 6

Summary of Contents for EFM32 EFM32GG11 Giant Gecko Series













Search results

Summary of Contents for EFM32 EFM32GG11 Giant Gecko Series

Reviews:

Related manuals for EFM32 EFM32GG11 Giant Gecko Series

Brands by name

Popular brands

Silicon Laboratories EFM32 EFM32GG11 Giant Gecko Series, Quick Start Manual

Search results

Summary of Contents for EFM32 EFM32GG11 Giant Gecko Series

Reviews:

Related manuals for EFM32 EFM32GG11 Giant Gecko Series

Brands by name

Popular brands