7. Integrated Development Environment
Figure 7.1. Simplicity Studio
Simplicity Studio includes various examples in source form to use with the Starter Kit. To run these examples:
1. Provide power to the board by connecting the DBG USB connector to the PC using the provided USB cable.
2. Move the switch to the AEM position.
3. Select the J-Link adapter for the kit under [
Devices
].
4. Click the [
Getting Started
]>[
New Project
] button.
5. In the wizard, ensure the EFM8BB2 Busy Bee Starter Kit Board kit and click [
Next
].
6. Select [
Example
] and click [
Next
].
7. Select the desired example or demo from the list and click [
Next
].
8. Click [
Finish
].
9. Click the [
Debug
] button in the IDE to build and download the code to the hardware.
10. Follow the instructions at the top of the main example file to set up the hardware as needed.
11. Click the [
Resume
] button to start running the example.
UG237: EFM8BB2-SLSTK2021A User's Guide
Integrated Development Environment
silabs.com
| Building a more connected world.
Rev. 0.4 | 14
