AN888: EZR32 Quick Start Guide
The EZR32LG, EZR32WG, and EZR32HG Wireless MCUs deliver a high-performance,
low-energy wireless solution integrated into a small form factor package. By combining a
high-performance Silicon Labs EZRadio or EZRadioPRO sub-GHz RF transceiver with
an energy-efficient 32-bit MCU, the EZR32LG and EZR32WG family provides designers
the ultimate in flexibility with a family of pin-compatible devices that scale with
64/128/256 kB of flash and support transceivers. The EZR32HG family provides the high
energy efficiency of the Cortex-M0+ core in a smaller form factor with 32/64 kB flash.
The ultra-low power operating modes and fast wake-up times of the Silicon Labs energy
friendly 32-bit MCUs, combined with the low transmit and receive power consumption of
the sub-GHz radio, result in a solution optimized for battery-powered applications.
The EZR32LG, EZR32WG, and EZR32HG Wireless Starter Kit (WSTK) is a low-cost,
fully featured starter kit that allows designers to evaluate the performance and features
of the EZR32LG/WG/HG device family. The kit will provide all hardware and software
tools needed to develop and debug applications using the EZR32LG, WG or HG low-en-
ergy Wireless MCUs. Hardware tools include an on-board debugger, advanced energy
monitoring, and integrated packet trace, which are all available either over USB or Ether-
net interfaces. The kit is fully supported by Silicon Labs’ software libraries and the kit
board support package (BSP).
KEY FEATURES
• How to install EZR32 SDK in Simplicity
Studio
• Shows where to find documentation
• How to use the SimpleTRX sample
application
• How to modify the Radio configuration
• How to use radio GPIOs for debugging
silabs.com
| Smart. Connected. Energy-friendly.
Rev. 0.4
