Silicon Laboratories Si106 Series, User Manual

S i 1 0 6 x - D K

2

Rev. 0.2

2.  Software Setup

There are two software tools provided by Silicon Labs to aid in wireless MCU software development: the Wireless
Development Suite (WDS) and the Silicon Labs Integrated Development Environment (IDE). To download and
install the Silicon Labs IDE and unlimited Keil PK51 Professional Developer’s Kit, follow this link:

http://pages.silabs.com/lp-keil-pk51.html.

The recommended starting point for wireless MCU development is the WDS software tool. This tool is able to
identify the connected boards by reading their identification memories (EBID) and provides valuable help by greatly
simplifying radio configuration, evaluation, and application development.

2.1.  Hardware and Software Requirements for WDS



Windows XP

®

 or later



Microsoft .NET framework 3.5 or later



Silicon Labs CP210x VCP driver



WDS v3.1.9.0 or later

The lack of the .NET framework and VCP driver are recognized during the WDS installation. The install wizard will
install the missing components after prompting the user for permission.

2.2.  Download WDS

WDS can be obtained from the Silicon Labs website free of charge from the following link:

http://www.silabs.com/Support Documents/Software/WDS3-Setup.exe

.

2.3.  Installation Steps

Note:

Before installing this software, local administration rights must be obtained from your network administrator.

1.  Start WDS3-Setup.exe

2.  Click “Next” to start the installation process

3.  Accept the license agreement by clicking the check box, and then press the “Next” button.

4.  Select the installation folder.

It is recommended to use the default folder, C:\Program Files\Silabs\WDS3

5.  When your settings are confirmed, click “Install” to continue.

6.  Click “Finish” to close the WDS Installer.