Figure 11.3. GITEKI Mark
11.1.7 South Korea - KC
The BGM220S22A modules have a RF certification for import and use in South-Korea.
Certification number is: R-R-BGT-BGM220S2
When integrating the RF-certified module, an end-product is exempted from doing the RF emission testing, as long as the recommen-
ded design guidance is followed, and the approved antennas are used.
EMC testing, and any other relevant test, might still be required for full compliance.
11.2 Standards-Based Certifications
11.2.1 Bluetooth Qualification
The BGM220S modules come at launch with a pre-qualified Bluetooth Low Energy RF-PHY Tested Component having Declaration ID
of D044526 and QDID of 155407, and having a listing date of 2020-09-04.
The BGM220S modules additionally have a pre-qualified Bluetooth Low Energy RF-PHY Tested Component based on Core Specifica-
tion 5.3 having Declaration ID of D056805 and QDID of 178495, and having a listing date of 2021-11-12.
Notice that the validity set by the SIG for Tested Components is currently of 3 years: during the product lifetime, Silicon Labs will re-
assess or re-qualify an RF-PHY Component as it expires, whenever applicable. In case of a re-qualification an RF-PHY Tesed Compo-
nent will come with a new DID and a new QDID, and these will be then reffered to in end-product listings. Newer DIDs and QDIDs can
be discovered by using the search engine in the SIG's Launch Studio, or by asking Silicon Labs via the technical support platform.
This module’s RF-PHY Tested Component should be combined with the latest Wireless Gecko Link Layer and Host pre-qualified Com-
ponents by Silicon Labs, when in the process of qualifying an end-product embedding the BGM220S via the SIG’s Launch Studio.
BGM220S Wireless Gecko Bluetooth
®
Module Data Sheet
Certifications
silabs.com
| Building a more connected world.
Rev. 1.1 | 54
