TO O L S T I C K 8 5 0 D C - U G
6
Rev. 0.2
To configure pins, click on the
DefaultMode Port I/O
tab at the bottom of main window. Clicking on a pin brings up
a property window for the pin. Clicking anywhere else in the main window opens a property window for the
crossbar. Select multiple pins with
Ctrl + left click
or mouse dragging over the desired set of pins. The package
diagram displays the configured peripherals on the pins, including non-crossbar signals (i.e., ADC inputs).
Code generation updates every time the configuration project saves. After configuring the device, add any non-
initialization code, build, and debug the same as with any other project.
More information on Simplicity Configurator can be found in
AN0823: Simplicity Configurator User’s Guide
and
AN0821: Simplicity Studio C8051F85x Walkthrough
. Application notes can be found on
www.silabs.com/8bit-
appnotes
.
Figure 6. Simplicity Configurator – Configuring Port I/O
