ETRX357
©2016 Silicon Labs
- 4 -
R3xx Firmware in an HA Network
3.1 Typical commands to start a PAN
AT+DASSL
Disassociate from
previous network if
desired
AT&F
Restore to a known state
if desired
ATI
Telegesis ETRX357-LRS
R309C
000D6F0001B65311
Check firmware version.
It ought to be R308 or
higher
AT+N
+N=NoPAN
Check network status
ATS00=6319
Home Automation
channel mask
ATS0A=0114;password
Use predefined Link Key
ATS09=5A6967426565416C6C69616E63653039;password
Define HA Link Key
AT+EN
Establish network if
necessary
ATS0A0=0;password
Allow joining (optional,
this is the default setting)
ATS0A0=1;password
Disallow joining when all
the sensors have joined
ATSALL:FFFD,0A0=0;password
Allow joining via all other
devices in the PAN
ATSALL:FFFD,0A0=1;password
Block joining via any other
device in the PAN
ATS0F=0104
Allow display of messages
that arrive on endpoint 2
ATS0EA=1
Suppress display of
“SR…” prompts
ATS0FC=1
Optional with R309. Data
is shown in hexadecimal
format instead of raw
characters
