4. Overview
4.1 Part Numbers
The part number convention is RD-XXXX-YYYY, where:
RD
Reference Design
XXXX
Reference Design Number
YYYY
Reference Design Component
This document will use the reference design number (RD-XXXX) when describing the complete design, and the reference design com-
ponent (RD-XXXX-YYYY) when describing a specific component.
The following table provides a description and PCB marking for each part number.
Note:
Some cases lack sufficient space on the PCB, and an internal “IST” marking appears on the PCB instead of the “RD” part num-
ber.
Table 4.1. Part Numbers and Description
Part Number
PCB Marking
Description
RD-0051-0201
NA
ZigBee Smart Outlet Reference Design Kit with North America plug using
EFR32MG1P232F256GM48, Si7021, Si1141 and PCB Antenna.
RD-0051-0101
IST-A0081 rev 2.0
(Power Board)
IST-A0074 rev 4.0
(Radio Board)
IST-A0075 rev 2.0
(Sensor Board)
ZigBee Smart Outlet Reference Design Evaluation Board with North America
plug using EFR32MG1P232F256GM48, Si7021, Si1141 and PCB Antenna.
4.2 ZigBee Smart Outlet Reference Design Kit
Kit Contents:
• ZigBee smart outlet reference design.
• Quick start card to obtain the latest reference design collateral.
UG171: ZigBee
®
Smart Outlet Reference Design (RD-0051-0201) Kit User's Guide
Overview
silabs.com
| Smart. Connected. Energy-friendly.
Rev. 0.1 | 4