background image

ON     OFF

Please read these instructions carefully before use

Micro-Cut
0.12*0.35 Inches
80 Sheets (70gsm)
6 Sheets

19L
8 Minutes

Cut Style
Shred Size
Auto Capacity
Manual Capacity
Shreds
Basket Capacity
Continuous Run Time

Speed
Auto Start/Stop
Paper Entry Width
Manual Reverse
Overload Protection
Dimension
Unit Weigh

2M Per Minutes
Yes
220mm
Yes
Yes
380*270*530mm
11.7KGS

Paper, Credit Cards, 

CD’s / DVD’s

NOTE: Before operating your new Micro-Cut Shredder

please be sure to 

read through all of the instructions and warnings carefully.

Warning

1. Important safeguards to avoid serious injury.
2. The shredder is only suitable for shredding of paper and credit cards. Any other use 
    or modification shall be deemed to be improper and substantially increase the risks 
    of accident. 
3. NEVER insert hand or fingers into slot opening.
4. Keep eyes protected when operating and cleaning the product.
5. Do not place fingers too close to the shredder’s opening as serious injury may occur
6. Place the shredder close to an easily accessible electric socket. 
7. To prevent injury, keep all loose articles of clothing, ties, jewelry, long hair or other 
    loose objects away from the shredder.
8. Repairs must be executed by a specialist, please do not attempt to repair this at home.
9. Always turn off the device and disconnect the power plug before removing the 
   wastebasket. 
10. Always turn the shredder off before cleaning, moving, or emptying the wastebasket.
11. The device may not be operated with a damaged power cord to avoid electric shock 
      or short circuit.
12. Empty the wastebasket regularly so that the shredder’s output is not impeded.
13. Never use any oil, lubricants or liquids in or around the shredder as some fluids can 
      combust causing serious injury.
14. Keep children and pets away from shredder 

AT ALL TIMES

.

15. Never use flammable, petroleum-based or aerosol cleaners on this product.  Some 
      agents may combust causing serious injury.  

Use only recommended lubricant in 

      a non-aerosol container.

16. For indoor use only.

SPECIFICATIONS

Your new Shredder complies with the following specifications

1. Insert the waste basket into the Shredder. 
2. Connect the power cord to any standard 220~240 volt AC socket.

3. Turn on the power switch on the side of the shredder

and make sure the “Lock/Open” 

    switch on the top stays “Lock”.
4. Your shredder is now ready to be used.

Use the switch located on the top of your shredder to select one of the followings settings:
Rev:  In the unlikely event of a paper jam, use the reverse setting to help clear the blades 
           of paper that have not properly passed through.
Power:  This setting turns on your shredder. 
Fwd:  Set the switch to this position to shred. 

Installation

Shredder Settings

Shredder Capacity

Max 6 sheets for manual feed solt

Max 80 sheets for Auto feed solt

ON     OFF

Power Switch

ON     OFF

Your new Shredder will ship with the following items.
1. 80-Sheet Auto Feed Micro-Cut Shedder with CD/DVD Slot
2. 5’ Power Cord (Attached)
3. User’s Manual
4. Warranty Information

Cleaning

Danger! Unplug the power cord before cleaning to avoid risks of electric 

shock! 

Beware of the sharp blades!

1. Empty the wastebasket regularly. 
2. Clean the wastebasket and exterior of the shredder with a slightly dampened cloth 
    and possibly with a mild detergent. 
3. Remove any residue in the cutting slot with a suitable object such as a screwdriver. 
   Make sure to unplug power before cleaning to avoid injuries.
4. Do not allow water to enter shredder when cleaning.

In the event of a paper jam, select the “

Reverse

” setting to eject the paper and then 

insert the paper again. If this does not work or if the wastebasket has become full and 
impeding the functioning of the blades, unplug your shredder and clear all paper from 
the wastebasket. If there are pieces of paper jammed into the blades, make sure that 
your shredder is unplugged and carefully remove the pieces of paper before placing 
the shredder back onto the wastebasket. Allow the shredder to cool for at least 15 
minutes before continuing.

Troubleshooting:

1. Your shredder can automatically shred up to 80 sheets each time. 
2. Your shredder can manually shred up to 6 sheets each time.
3. One folded sheet of paper equals 2 sheets of paper.
4. Attempting to shred more than 80 sheets can lead to paper jams.
5. Continuous shredding should not last more than 8 minutes, after which your 
    shredder should be allowed to cool down for at least 15 minutes before continuing.
6. If your shredder is used continuously for more than 8 minutes or has a paper jam, it 
    will automatically switch itself off. In case of an overload, set the switch in the “off” 
    position for a minimum of 15 minutes before turning your shredder back on.

PACKAGE CONTENTS

Auto Feed Paper Sherdder

PS-990C INSTRUCTION MANUAL

Reviews: