Use tools for checking the torque.
Always use rubber joints (long-lasting synthetic rubber) to avoid direct
contact between the metal parts of the PV module and the supporting
structure as well as to prevent possible deformations of the parts that
could damage the module.
Other fastening methods that attach the module around the perimeter
are also acceptable, such as those designed for integration on roofs or
similar methods.
A minimum space of 5 mm must be left between modules in order to
prevent contact between them due to thermal expansion. For less space
between modules, rubber gaskets that prevent contact must be used.
The recommended layout in the event that anchor clamps are used for
the module with a frame is the layout shown in the following schematic
of the SLK60P6L and SLK60M6L modules.
Mechanical assembly of the modules
26
Instructions for using photovoltaic modules
Summary of Contents for Photovoltaic
Page 1: ...use...
Page 12: ...11 tion Operation with the cell in the shade...
Page 43: ...Notes Instructions for using photovoltaic modules...
Page 44: ......
