20
(orange) will turn on and a fan sound (similar to the sound of a
hairdryer) will start.
7.
Approximately 3.5 seconds after pressing the
ON/ STBY SWITCH
,
the
READY INDICATOR LIGHT
(green) will turn on. The device is
then ready for you to trigger the first pulse at the lowest energy
level.
8.
If this is your first treatment - Choose the energy level. Flash&Go
offers 5 levels of energy from 1 (the lowest) to 5 (the highest).
To choose the right energy level for your first treatment, test
each treatment area separately:
Place the
TREATMENT SURFACE
on the skin and press the
trigger to deliver one pulse.
If you did not experience abnormal discomfort press the +
button once and deliver one pulse on a different spot at
energy level 2.
Continue testing at increased energy levels until you have
reached the highest level that you feel comfortable with.
If within one hour you experience no adverse effects, you
can start your full treatment at that energy level.
Repeat this test for each body part you intend to treat.
9.
Set the energy level. If the energy level should be higher than
the lowest, press the
ENERGY LEVEL SETTING BUTTONS
using the
