21
“-“ or “+” to respectively decrease or increase the energy level,
until the desired energy level is set and represented by 3 energy
level indicator lights (For details see “Energy Level” chapter
inside this user manual).
10.
Apply the
TREATMENT SURFACE
to the skin, making sure the
skin is spread evenly and smoothly.
As soon as the
TREATMENT SURFACE
is in full contact with the
skin, the
READY INDICATOR LIGHT
will start blinking.
11.
Press the
PULSE BUTTON
. The device will first determine the
color of your skin.
If the color of the skin is light enough for safe application, the
device will flash a pulse of light onto your skin, and the
READY
INDICATOR LIGHT
will turn off.
You will see a bright flash of light and simultaneously hear a
subtle pop sound, which is a normal noise for the device. You
will feel a mild sensation of warmth and tingling.
Silk’n Flash&Go™ will immediately recharge for the next pulse.
After 3.5 seconds the
READY INDICATOR LIGHT
will turn on
again.
12.
Remove the
TREATMENT SURFACE
from the treated area of skin.
13.
Move the
TREATMENT SURFACE
to another area of skin. Use the
pressure marks the device just made on your skin to guide you
for proper positioning of the next pulse, avoiding both gaps and
overlaps between pulses.
